February 12, 2023
Finned tubes are able to even out the heat transfer between the inside of the tube and the outside. When the heat transfer coefficient on the outside of the tube is significantly lower than the heat transfer coefficient on the inside of the tube, there is a major advantage to incorporate fins on the outside tube surface to take full advantage of the high heat transfer rate on the inside of the tube.
Product Information:
tube sizes
|
3/4" O.D. TO 8" NPS (8.625" O.D.)
|
fin heights
|
3/8" TO 1 1⁄2"
|
fin thickness
|
20 ga. (.035") to 12 ga. (.102") segmented width: 4.5mm or 8mm
|
segment width
|
4.5mm OR 8mm
|
fin pitch
|
1 to 7 fins per inch
|
material
|
any material or combination that can be resistance or arc welded
|
FAQ
1. How can we guarantee quality?
always a pre-production sample
before mass production;always final inspection before shipment;
2. Why should you buy from us not from other suppliers?
GNEE adopts the advanced design concept of american cti, absorbs advanced experience at home and abroad, and continues to develop
high-quality, efficient, first-class, reliable and durable heat exchange and refrigeration products.We provide professional design, installation, use, maintenance, repair, transformation, technical support for system upgrades and has passed the certification of gb/t9001-2008, is09001-2008 quality management system;
3. Whether you have the ability to accept the product customization?
Products can be customized, we can make the new thermoforming or extruding mode based on your drawings and we can sign a confidentiality agreement about your patented product, pls contact us for any further information.